Assign a Station

About this task

You can assign a station on the switch for each main attendant. The station requires a physical port on the switch. A physical voice terminal is not required. However, if a voice terminal is not attached to the port, the switch generates a minor alarm.

Use the following procedure to assign a station for a main attendant:

Procedure

Assign a station for the type of available port.
See the Administrator's Guide for Communication Manager, 03-300509for information on assigning a station.
If you are using the automated attendant as an incoming destination for a trunk group, a ssign the station extension as the incoming destination for the incoming call trunk groups that will be served by the automated attendant.
If you are notusing the automated attendant as an incoming destination for a trunk group, confirm that the Auth Code field is set to n and continue with step 3.
From the attendant console or administrative voice terminal, activate Call Forwarding All Calls for the automated attendant extension.
Make the destination the messaging hunt group extension.