Communication Manager Messaging Hardware

Supported Servers

Communication Manager Messaging Embedded is supported on S8300D, S8510, S8800, HP ProLiant DL360 G7 1U and Dell PowerEdge R610 Servers.

Communication Manager Messaging Federal is supported only on an S8800 Server.

SIP protocol

This protocol integrates Communication Manager Messaging and Communication Manager through the SIP protocol. This protocol involves the use of Session Manager R6.0 that handles SIP calls and routes them through Communication Manager.

Disk Partioning

The Communication Manager Messaging server does not use RAM Disk. As a result, the server does not create a RAM Disk partition and does not boot from RAM Disk.

Media Modules

No media modules required for Communication Manager Messaging.

Ports

Communication Manager servers have a serial port. This serial port can be used for a direct connection to a laptop or PC. The port is called Service on the S8XXX server.

The AUDIX Data Acquisition Package (ADAP) is not supported.

Terminals

You can administer the system through the use of a SSH session and one of the following terminal emulations:

• Avaya 386

• Avaya 4410 (for PROCOMM PLUS 4410 or Terranova emulation)

• Avaya 513 (for Terranova emulation)

• Avaya 715

• Avaya 4425

• vt100

This section discusses the hardware and software components that make up Communication Manager Messaging.

See Messaging Architecture for an illustration of the hardware and software components that comprise the Communication Manager Messaging server.