This installation checklist provides descriptions of the required procedures to install a Communication Manager Messaging system.
Communication Manager Messaging release 5.2 and Communication Manager are co-resident on a server. They are integreated using H.323 / Q.Sig protocol.
You can install Communication Manager Messaging release 5.2 on an S8300, S8400, S8500-Series Server.
Note You must install and configure Communication Manager before you set up the Communication Manager Messaging (CMM) server.
The license and authentication files are installed on Communication Manager.
As you complete a procedure, make a check mark in the "
" column.
| Task | Subtasks, If Any / Related Information | Description | |
| 1. Review Demarcation Points | Check where Avaya's responsibilities begin and end with respect to the customer's LAN. | ||
| 2. Review Security Issues | Understand good password and system security. | ||
| 3. Review Prerequisites | Review the following: | ||
| Gather the Required
Tools
. |
Use Philips and flathead screwdrivers and an ESD wrist strap. | ||
| 4. Install the Communication Manager server | Communication Manager release must be 5.2 | Use the CD-ROM to install Communication Manager to install
Communication Manager software.
For detailed information, refer the appropriate server documentation. |
|
| 5. Administer the Communication Manager server | |||
| 6.Install Communication Manager Messgaing software | See the Installing and configuring the Communication Manager Messaging guide | ||
| 7. Perform Initial Administrsation for Communication Manager Messaging | Stop Messaging | ||
| Administering the Switch Link | |||
| Starting Messaging | |||
| Setting Communication Manager Messaging server parameters Transfer | |||
| Setting system-wide messaging parameters | |||
| Adding test subscribers for messaging | |||
| Perform System Acceptance Testing |